Visit our product page for more information on this and other Port-A-Cool-coolers.
Big industrial cooler Port-A-Cool 48"
Port-A-Cool 48", Port-A-Cools biggest portable cooler
High performance One-speed Port-A-Cool 48" Cools 325 m2
•Heavy duty 1/2 horsepower motor
•Almost maintenance-free operation
•Flexible capabilities for ducting
•Shipped completely assembled and ready to operate, right out of the box
•Operates for cents a day, a fraction of air conditioning
•Environmental friendly with efficient / effective resource use
•Unit & water supply are both portable
•Durable one-piece molded plastic poly-ethylene housing
•Energy Efficient Motor and pump
•Cooling is accomplished naturally through process of evaporation
Leading manufacturer of portable evaporative cooling units for industrial applications
Port-A-Cool is the leading manufacturer of mobile evaporative cooling units
Please visit our website www.lc-europe.com for more information on the most innovative portable coolers in the world.
Cooling solution for military applications
The Port-A-Cool mobile evaporative cooler is ideal for military applications and therefore can be seen a lot in various armies and in various applications. The Port-A-Cool adiabatic cooler does not need any installation, just connection to electricity and water and can lower the temperatures up to 20 degrees in an effective, ecological and economical way.
Various countries have choosen for the advantages of the Port-A-Cool adiabatic coolers and therefor in the whole world at missions, at bases and at trainings the Port-A-Cool takes care of the cooling. Cooling inside the tents, field kitchens, helicopter and aircraft hangers but also in the open air, there the Port-A-Cool works best with ventilation.
On the first two pictures you can see the Port-A-Cool 48 inch evaporative cooler, this adiabatic cooler is the biggest cooler in the Port-A-Cool range and able to cool down an area of 325m2. The last picture shows a Port-A-Cool 36 inch (cooling capacity of 250m2), cooling a car workshop during a military mission.
Please feel free to contact us for further information on these or other Port-A-Cool models:
Life´s Cool Europe Port-A-Cool´s product range
- Port-A-Cool Cyclone
- Port-A-Cool JetStream 1600
- Port-A-Cool JetStream 2400
- Port-A-Cool 16 inch
- Port-A-Cool 16 inch Carterfiller
- Port-A-Cool 24 inch
- Port-A-Cool 36 inch
- Port-A-Cool 48 inch
Cost-saving industrial cooler: Port-A-Cool 48 inch
The largest mobile evaporative cooler of the Port-A-Cool range is the Port-A-Cool 48 inch. This machine saves money cooling large open, industrial areas like warehouses and hangars. With a cooling capacity of 325m2 the machine is recognized as one of the most powerful and effective evaporative coolers, saving a lot of money compared to other cooling solutions like airconditioning. There the machine is installation-free (just connect to the water and electricity) the Port-A-Cool is very economical in purchase. Like any other Port-A-Cool evaporative cooler this machine is environmental-friendly, using small amounts of electricity and water, but lowering up to 15 degrees and guaranteeing a fresh, natural breeze.
Click here for more information about the Port-A-Cool 48 inch. Port-A-Cool has a wide range of different mobile cooling solutions, click here to compare the different options for your company or send us an e-mail for more information: info@lc-europe.com
Life´s Cool Europe´s Port-A-Cool evaporative coolers
Port-A-Cool has a wide range of powerful and effective evaporative coolers. Life´s Cool Europe is the proud subdistributor is the proud distributor of Port-A-Cool in Europe with direct disponibility of all models Port-A-Cool in Europe. Next to the website of Life´s Cool Europe and Port-A-Cool, Life´s Cool Europe has developed this and other blogs where you can find more information about the working, advantages and applications of Port-A-Cool evaporative coolers.
For the Spanish speaking consumers we developed a Spanish blog:
Next to these blogs all different products are highlighted in their own blog:
For more information:
Port-A-Cool, the mobile refrigeration equipment, ideal for industrial applications
Life´s Cool Europe, markets mobile evaporative cooling systems from Port-A-Cool, world market leader in evaporative cooling. Finally Europe can enjoy from a product which fills the gap between doing nothing and a traditional airconditioning.
Every summer it is getting warmer and warmer. The airconditioning is not the only solution to create a pleasant (working) environment. The mobil cooling equipment Port-A-Cool, distributed in Europe by Life´s Cool Europe, workd where on places where a traditional airconditioning doesn´t work or is too cost prohibitive. The ecological cooling system consumes little energy and works very efficient: by evaporation of water a fresh air flow is created, being able to lower temperatures between 7 and 26 degrees Celcius. The Port-A-Cool evaporative cooler only requires electricity and water, consuming a 10% of the total consumption of an air conditioning. The machine is very easy to use and maintain, and there is no installation required.
Models
Port-A-Cool has 7 different models from different dimensions, coolers which ventilators have 16", 24", 36" and 48". With the introduction of the new Cyclone 3000 and JetStream 1600 and 2400 a complete range of mobile evaporative coolers can be offered, offering solutions for many applications and for many situations. All machines are ready out-of-the box, after unpacking the product, the machine can be connected to the water connection (or the tank can be filled directly) and electricity (220V) and the cooling sensation can be experienced directly.
The cooler and the (integrated) water tank are mobile and can be moved easily, there where the cooling is wanted. With the new JetStream-range the machines can work more than 10 hours without the need to refill the water tank. The machines only generate cool air, now water or mist can be felt or seen. With the complete range of products the cooling capacity varies from 90m2 up to 325m2. Applications where the Port-A-Cool can often be found are well-ventilated places, like hangar, industry, warehouses and marquees. The machine is also the perfect solution for outdoor cooling, for example at sport matches.
Environment at work
For its structure and the cooling pads that are included in the machine, the air is filtered and pure, making it ideal for well-ventilated and open areas. The more ventilation, the better cooling effect can be achieved. This can be seen at hangars and warehouses, the doors are often open because of the constant flow of people and goods. In such environments cooling often couldn´t be realized, but now things have changed. With the Port-A-Cool these open areas can be cooled and the doors do not have be closed, because the Port-A-Cool transforms the warm air into cool air. The Port-A-Cool is not only used to cool people, but also animals and machines, when there is a risk that machines get to hot, like in glass and steel factories.
Applications
Port-A-Cool has a lot of applications. The machine is used a lot in the glass, steel and car industry (factories, warehouses, workshops etc), in hangars, at car workshops, in (open air) events, cooling marquees and sport schools.
For more information:
Life´s Cool Europe
C/Diputació 475
08013 Barcelona
+ 34 - 932 312 810
For sales outside Europe:
Beat the heat with Port-A-Cool in sports applications
With a Port-A-Cool® portable evaporative cooling unit at work, outside activities like sporting events become more comfortable and enjoyable in spite of summer heat or warmer than comfortable conditions.
On the sidelines, on the field, in the gym or anywhere your athletic interests take you, Port-A-Cool® units provide cooling relief so you can enjoy your sport or keep your players refreshed and in the game. Four fan sizes increase the variety of uses for Port-A-Cool® units and the list of uses for this versatile product are virtually endless. Since Port-A-Cool® units require only 110 or 220 volts and tap water to operate, a unit can be placed almost anywhere and moved easily on casters.
Port-A-Cool® cooling units are offered with a variety of options. Although the large sump tank in the bottom of the unit holds 95 liters water in the 48-inch unit, a portable 180-liter water tank, Port-A-Filler, is available for use with all size units for applications where a nearby water source is not available. Or, you may choose the new JetStream-models, with integrated water tank and a heavy duty Port-A-Cool® unit which can provide several days operation without refilling (ten to welve hours per day) and cools approximately between 100 and 200 square meter of unobstructed area. Also, the four casters, mounted to the bottom of all evaporative coolers, are four-inch diameter swivel casters with a plate which allows for upgrades to larger diameter casters, providing ease of movement on different terrain.
Port-A-Cool® units are now being used worldwide in numerous, diverse applications. Many NFL and college teams use Port-A-Cool® units on the sidelines to cool hot, weary players. Port-A-Cool® units can be used effectively in all these applications plus many more because the unit offers features that are pleasing and beneficial to almost everyone. The units are portable, available in four sizes, easy to operate and maintain, environmentally-friendly and operational cost is affordable while providing cooling wherever it is needed.
For more information on Port-A-Cool® evaporative cooling units for Europe call 0034 – 932 312 810 or visit our website http://www.lc-europe.com/. For sales outside Europe please contact the manufacturer Port-A-Cool LLC in Center (Texas, USA), by phone 1-800-695-2942 or or by visiting the website http://www.port-a-cool.com/. Port-A-Cool® units can solve your cooling challenge.
Installation and maintenance of the Port-A-Cool® evaporative cooler
Installation of the PORT-A-COOL® unit
The PORT-A-COOL® evaporative is very easy to install, below we explain the measurement you have to take before you can enjoy the coolness of the PORT-A-COOL® evaporative cooler.
Unpacking the PORT-A-COOL® unit
The standard Cyclone, JetStream, 24”, 36” and 48” models are shipped completely assembled and sitting on a plastic pallet with a large cover box strapped over the PORT-A-COOL® unit. The 16” model PORT-A-COOL® units are shipped in an enclosed corrugated box and need only to be removed from the box.
The standard Cyclone, JetStream, 24”, 36” and 48” models are shipped completely assembled and sitting on a plastic pallet with a large cover box strapped over the PORT-A-COOL® unit. The 16” model PORT-A-COOL® units are shipped in an enclosed corrugated box and need only to be removed from the box.
Connecting the water and electricity
Water can be provided by a watertank (16” model or extra tank) or via the traditional water connection. An European garden hose (exclusive with the PORT-A-COOL®) can be connected constantly to the water connection, water will not enter when the tank is full. Or the machines work several hours on the water inside of the tank. All PORT-A-COOL®s are foreseen of 220volt and CE for the European market.
Placement of the PORT-A-COOL® unit
PORT-A-COOL® unit should be used in well-ventilated areas only.
There are three primary considerations when decidiing where to place the PORT-A-COOL ® unit.
1. Fresh Air Supply – The inlet side of the PORT-A-COOL® unit (pad side) must be placed so as to insure that a smooth, uninterrupted supply of fresh air is available.
2. Air Pattem – The cool air discharged from (fan side) the PORT-A-COOL® unit should have a clear area in which to circulate, being as free of obstructions possible
3. Ventilation (Exhaust) – There should be a defined place in which the air from the PORT-A-COOL® unit can be exhausted from the area being cooled. This is to prevent the PORT-A-COOL® unit from recirculating air that has already been through the cooling process.
Filling with water
Once the sump tank is full, the float valve will shut off the supply flow. On the 16” filler cart model fill the 80 liter tank reservoir referring to the sight glass on the front of the reservoir for filling amounts. When turning on the pump, the supply of water flow will be restarted. The new JetStream 1600 and 2400 have a tank of 153 and 186 liter, this guarantees the use of the cooler for at least 10 hours without the need to refill the water tank.
Once the sump tank is full, moving the pump swith on the ´ON´ position will turn on the pump. The water will be wetting the cooling pads.
Starting the fan
Starting the fan is as simple as turning on the switch on the desired speed and level of cooling. It is preferred to step slowly to the maximum speed of the machine. When turning off the fan, the pump should be turned off about 15 minutes before the fan, to allow the cooling pads to dry. This will increase the life of the pads.
Maintenance & storage
a. Daily maintenance
Daily maintenance is really more an oprational consideration than actual maintenance. On a daily basis, the pump should be turned off approximately 15 minutes before the fan is turned off.
Daily maintenance is really more an oprational consideration than actual maintenance. On a daily basis, the pump should be turned off approximately 15 minutes before the fan is turned off.
b. Weekly maintenance
Once a week it is recommended to shut down the machine to drain the sump tank. Closing the Spray Bar Adjustment Valve and opening the Drain Valve accomplish this. A hose can be attached to the Drain Valve to direct the drained water to a remote disposal area. Once the Drain Valve is open, starting the pump will drain the unit. In a dusty environment the dirt and any remaining water may be vacuumed out ousing a wet/dry shop vacuum and wiped clean with a cloth.
Once a week it is recommended to shut down the machine to drain the sump tank. Closing the Spray Bar Adjustment Valve and opening the Drain Valve accomplish this. A hose can be attached to the Drain Valve to direct the drained water to a remote disposal area. Once the Drain Valve is open, starting the pump will drain the unit. In a dusty environment the dirt and any remaining water may be vacuumed out ousing a wet/dry shop vacuum and wiped clean with a cloth.
c. Storage
Storage of the PORT-A-COOL® unit is very simple.
1. Drain all the water from the sump tank and clean as above, ensuring that the pads and sump are completely dry.
2. Roll up the electrical power cord and secure it to ensure that it will not be rolled over, tripped over or caught in equipment
3. Cover the PORT-A-COOL® unit completely to prevent dust build-up and store in a dry area.
Storage of the PORT-A-COOL® unit is very simple.
1. Drain all the water from the sump tank and clean as above, ensuring that the pads and sump are completely dry.
2. Roll up the electrical power cord and secure it to ensure that it will not be rolled over, tripped over or caught in equipment
3. Cover the PORT-A-COOL® unit completely to prevent dust build-up and store in a dry area.
For further details please contact:
Life’s Cool Europe, s.l.
Diputació, 475, bjs. // 08013-Barcelona
T-93 231 28 10 // Fax – 93 231 14 76
info@lc-europe.com
Life’s Cool Europe, s.l.
Diputació, 475, bjs. // 08013-Barcelona
T-93 231 28 10 // Fax – 93 231 14 76
info@lc-europe.com
or take a look at the website http://www.lc-europe.com
PAC-CVR-03 Port-A-Cool cover to protect your Port-A-Cool 48 inch cooler
Protect your 48'' Port-A-Cool Evaporative Cooler while it is not in use with the PAC-CVR-03. This vinyl evaporative cooler cover is durable, constructed from 100% heavy-duty vinyl, and is made to fit over any 48'' electric Port-A-Cool unit. As an ideal combination of durability and quality, this cover provides maximum protection against the elements and prevents your evaporative cooler from damage while in storage.
The PAC-CVR-03 is compatible with the Port-A-Cool PAC2K481S. This model is the biggest evaporative cooler in the Port-A-Cool product range and cools an area of aprox. 325m2, which makes it one of the favourite evaporative coolers in hangars and glass and steel factories.
Port-A-Cool Evaporative Cooling Units are Manufactured by Port-A -Cool, LLC., Center, Texas U.S.A., world´s market in mobile evaporative cooling systems. Life´s Cool Europe, based in Barcelona, is the master-distributor of Port-A-Cool in Europe. With a warehouse in The Netherlands there is a guaranteed fast-delivery throughout Europe of Port-A-Cool (foreseen of 220v and CE).
Contact the sales team of Life´s Cool Europe for further questions and/or enquiries: sales@lc-europe.com
Visit us at our booth at Interclima Elec - Paris Porte de Versailles
We would be pleased to welcome you at our booth at the Interclima Elec show in Paris (Porte de Versailles), which takes places between the 9th up to the 12th of February.
Our booth is located in Hall 3 J51, we can show you our lates models the Cyclone 3000 and JetStream 1600 and our all-time best sold model the Port-A-Cool 36".
Please send an e-mail to maurice@lc-europe.com if you have any question or want to have a free entrance for the show.
Top-3 applications Port-A-Cool 48" Evaporative Cooler
If we take a look at the Top-3 of different applications where you can find the 48" models we can distinguish the industrial sector, the military applications and aviation. The 48" model is used for the bigger aeras where ventilation is present and where an airconditioning does not work or is too expensive.
By clicking on the images you can visit the different applications and find out how the Port-A-Cool models can help you beating the heat and increase productivity and improve comfort.
1. Industry
Combine Port-A-Cool evaporative coolers to maximize cooling effect
Port-A-Cool evaporative coolers
Click on the arrow or the picture to find out which Port-A-Cool machine suits you best.
Click on the arrow or the picture to find out which Port-A-Cool machine suits you best.
Port-A-Cool 16 inch Cools 90 m2
Port-A-Cool 16 inch with tank Cools 90 m2
Port-A-Cool 24 inch Cools 167 m2
Port-A-Cool 36 inch Cools 246 m2
Port-A-Cool 48 inch Cools 325 m2
Cyclone
Accessories Port-A-Cool evaporative coolers
Subscribe to:
Posts (Atom)
